December 19, 2012

Bark River Mini Fox River Single Layer Leather Sheath

Single layer construction with double stitched top.
Belt loop designed for one carry position.
Water proofed inside and out.

November 20, 2012

Bark River Bravo 1 Double Layer Leather Sheath (Nov. 2012)

A new, slightly deeper sheath for Bark River Bravo 1. 
Two-position carry belt loop.

These sheaths are all hand made. No machines, no jigs - a lot of freehand work.

The liner comes up close to the top. The knife sits in the sheath securely without any straps. The top of the sheath was wet molded to the shape of the knife's handle.

October 16, 2012

Fallkniven A1, Fallkniven A1Pro Single Layer Leather Sheath ($110)

This is a single layer, slim, leather sheath for the A1.
This belt loop is for one position carry.

My single layer sheaths are constructed the same way as the double layer sheaths. Same materials, attention to details and waterproofing is used. Less materials and less time to make these means a lower price. These sheaths start at $85.

October 3, 2012

Fallkniven NL4 Frej Leather Sheath

This sheath is deeper for added security. 

Belt loop designed for high and low carry. 
Sheaths was treated inside and out with beeswax based compounds. 

September 1, 2012

Becker BK-2 Leather Sheath Prototype

This is a single layer sheath. It was wet molded around the knife. Friction keeps the knife securely in the sheath. Top double stitched for strength. 

August 18, 2012

Fallkniven F1, Fallkniven F1Pro Double Layer Sheaths ($165)

Two styles of a double layer sheath for the legendary Fallkniven F1

This is a design with a double stitch at the top. It reinforces the stress point and secures the knife in the sheath.

The belt loop is designed for high and low carry.

It is securely stitched at two points.

This sheath is also double stitched at the top.

The belt loop is attached to the carry strap with two Chicago screws. It can be easily removed.

The carry strap is permanently sewn to the sheath. 

Both sheaths are waterproofed inside and out.

August 14, 2012

Fallkniven A1, Fallkniven A1Pro Double Layer Sheath

This is another example of a double layer sheath:

The lining is made of 6-7 ounce leather. It extends above the outer layer made of 8-9 ounce leather. 

Both, inside and out, are water proofed with beeswax compounds. This sheath will withstand wet conditions. 

The knife can be secured with a leather retention strap. The strap is attached with a Chicago screw. It can be easily replaced if worn out.

The belt loop can be adjusted with three screws for low or high carry. It can be completely removed for horizontal carry.

Both layers are stitched by hand using a traditional saddle stitch method. Each stitch is knotted on the inside. The stitching will not come undone if the thread is damaged or cut.

The fold over design makes the sheath rigid.